Universal AC Remote Codes for Various Brands, Including How to Set Them.

Universal AC Remote Codes - Knowing the universal AC remote code is important if you ever need to buy a universal AC remote to replace the original one.

Universal AC Remote Codes for Various Brands

Air conditioners (AC) are quite essential in cities with high temperatures.

The goal is to keep the room cool so that all activities can be carried out comfortably.

However, over time, the AC may become damaged, especially as it ages.

Not only the unit itself, but the AC remote can also become damaged or even lost.

If this happens, you may have difficulty operating the AC, as the remote serves many functions.

For example, it allows you to lower or raise the temperature, turn the AC on and off, and perform other tasks.

Therefore, purchasing a universal AC remote can be a good solution, especially since they are easy to find everywhere.

However, the universal AC remote cannot be used immediately.

You need to set it up and enter a specific code that corresponds to your AC brand.

In this article, we will fully review how to set up a universal AC remote and provide a complete list of universal AC remote codes.

The following information is compiled from various sources. Let's dive in and read until the end!

Universal AC Remote Codes for Various Brands

Universal AC Remote Codes for Various Brands

Below is a complete list of universal AC remote codes from various brands! The following list is taken entirely from dutaserviceac.com.

Brand Remote Codes
AKIRA 796-797
AUX 180-199
AQUA 025-033
CHANGHONG 059, 079, 934, 947
CORONA 760-769
DAEWOO 332-333
DAIKIN 740-759
ELCO 982
ELECTROLUX 471-474, 807, 808, 250, 906
FUJITSU 700-719, 017
GOLDSTAR 303
GENERAL 659, 717, 718, 719
GREE 000, 020-039
HAIER 001-019
HITACHI 640-659
HUAWEI 281
HYUNDAI 780-789
LG 600-609
MCQUAY 790-795
MIDEA 040-058
MITSHUBISHI 551-599
MITSUKA / NATIONAL 904
PANASONIC / NATIONAL 660-689, 992, 242, 492, 742, 977, 968, 960, 958, 890
NATIONAL 770, 732, 685
NIKKO 810-811
SAMSUNG 610-629
SANYO 500-550, 860, 943, 946
SHARP 720-739
SHINCO 200-209
TCL 120-133
TECO 831-834
TOSHIBA 630-639, 017, 158, 682
TRANE 812-816
YORK 775-779

How to Set Universal AC Remote

After knowing the universal AC remote codes for various brands, the next step is to discuss how to set them.

This is important because universal AC remotes usually need to be set up first in order to function properly.

According to the kumparan.com page, which quotes the book Basic Techniques for Air Conditioner (AC) Maintenance by Lukito Dwi Yuono & Eko Budiyanto (2021:77), here's how to set up the AC remote:

  1. Press the 'On' button on the indoor AC unit to turn on the AC.
  2. Press and hold the 'Set' button on the universal AC remote for three to five seconds, until the digits in the lower right corner of the remote flash.
  3. Press the 'Temp' button to increase or decrease the temperature based on the list of AC codes provided for the brand reviewed in the previous section.
  4. If the code digits match, the AC unit will make a sound, indicating that the remote is connected to the AC.
  5. Finally, press the 'OK' button on the universal AC remote.
  6. To ensure that all the remote buttons are working, try them one by one.

That concludes our information on various universal AC remote codes and how to set them. We hope this report from larantukagypsum.com is useful to you.